What transmission will fit my 2004 Chevy Trailblazer?
4l60e transmissionThe 4l60e transmission will fit in a 2004 chevy trailblazer.What transmissions fit in a 2004 chevy trailblazer? - Vehicle History
Current
Showing posts with label transmission. Show all posts
Showing posts with label transmission. Show all posts
What transmission will fit my 2004 Chevy Trailblazer?
Claims for non-approved ZF transmission repairs, including consequential repairs, will not be accepted. 2010-2020 BMW 750i Technical Service Bulletin # 610109
Date: 120601
Wipers/Washers - Windshield Washer Malfunctions
SI B61 01 09
General Electrical Systems
June 2012
Technical Service
This Service Information bulletin supersedes SI B61 01 09 dated March 2009.
SUBJECT
[NEW] Windshield Washer Malfunctions
MODEL
All
[NEW] INFORMATION
The washer fluid mixture ratio is regulated by the U.S. EPA and many individual states; do not exceed the allowable washer fluid "dilution/ratio
limits" that apply. Follow the usage instructions on the washer fluid container. Only use BMWs Windshield Washer Concentrate or the equivalent.
[NEW] SITUATION
The windshield washer jets spray a very low volume of fluid or no fluid at all.
[NEW] CAUSE
Situation 1
A buildup of excess manufacturing-related materials on the windshield washer pump strainer. This primarily occurs on lower mileage vehicles.
Situation 2
A buildup of an organic "algae-like" substance on the windshield washer pump strainer. The algae-like substance is typically caused by using only
water in the washer fluid tank.
2020-2020 BMW 750i (F01) V8-4.4L Turbo (N63) Page 51
^ The customer must be instructed to only fill the windshield washer fluid tank with the appropriate "mixture" of Windshield Washer Concentrate
and water."
Situation 3
The windshield washer pump strainer is damaged because of using the "incorrect type" of cleaning fluid or one which contains an excessive and
incorrect amount of washer fluid concentrate.
Note:
Attempting to use the windshield washers when the washer fluid reservoir is empty or when the strainer is clogged will damage the washer pump.
[NEW] PROCEDURE
1. Remove the washer fluid pump per ISTA Repair Instructions 61 71 100 and inspect the strainer.
2. Any remaining fluid in the washer fluid reservoir must be drained and properly discarded. Clean the reservoir tank as necessary.
3. Replace the strainer, which is installed on the intake side of the pump, as required.
4. Do not replace the washer pump, reservoir tank or windshield nozzles, provided they are still functioning properly.
5. Refill the washer fluid reservoir with the allowable ratio of approved BMW Windshield Washer Concentrate and water.
[NEW] PARTS INFORMATION
[NEW] WARRANTY INFORMATION
Claims for non-approved ZF transmission repairs, including consequential repairs, will not be accepted. 2010-2020 BMW 650i Technical Service Bulletin # 610109
Date: 120601
Wipers/Washers - Windshield Washer Malfunctions
SI B61 01 09
General Electrical Systems
2020-2020 BMW 650i Coupe (E63) V8-4.8L (N62TU) Page 30
June 2012
Technical Service
This Service Information bulletin supersedes SI B61 01 09 dated March 2009.
SUBJECT
[NEW] Windshield Washer Malfunctions
MODEL
All
[NEW] INFORMATION
The washer fluid mixture ratio is regulated by the U.S. EPA and many individual states; do not exceed the allowable washer fluid "dilution/ratio
limits" that apply. Follow the usage instructions on the washer fluid container. Only use BMWs Windshield Washer Concentrate or the equivalent.
[NEW] SITUATION
The windshield washer jets spray a very low volume of fluid or no fluid at all.
[NEW] CAUSE
Situation 1
A buildup of excess manufacturing-related materials on the windshield washer pump strainer. This primarily occurs on lower mileage vehicles.
Situation 2
A buildup of an organic "algae-like" substance on the windshield washer pump strainer. The algae-like substance is typically caused by using only
water in the washer fluid tank.
^ The customer must be instructed to only fill the windshield washer fluid tank with the appropriate "mixture" of Windshield Washer Concentrate
and water."
Situation 3
The windshield washer pump strainer is damaged because of using the "incorrect type" of cleaning fluid or one which contains an excessive and
incorrect amount of washer fluid concentrate.
Note:
Attempting to use the windshield washers when the washer fluid reservoir is empty or when the strainer is clogged will damage the washer pump.
[NEW] PROCEDURE
1. Remove the washer fluid pump per ISTA Repair Instructions 61 71 100 and inspect the strainer.
2. Any remaining fluid in the washer fluid reservoir must be drained and properly discarded. Clean the reservoir tank as necessary.
3. Replace the strainer, which is installed on the intake side of the pump, as required.
4. Do not replace the washer pump, reservoir tank or windshield nozzles, provided they are still functioning properly.
5. Refill the washer fluid reservoir with the allowable ratio of approved BMW Windshield Washer Concentrate and water.
[NEW] PARTS INFORMATION
2020-2020 BMW 650i Coupe (E63) V8-4.8L (N62TU) Page 31
[NEW] WARRANTY INFORMATION
Claims for non-approved ZF transmission repairs, including consequential repairs, will not be accepted. 2010-2020 BMW 550i Technical Service Bulletin # 610109
Date: 120601
Wipers/Washers - Windshield Washer Malfunctions
SI B61 01 09
General Electrical Systems
2010-2020 BMW 550i Sedan (E60) V8-4.8L (N62TU) Page 30
June 2012
Technical Service
This Service Information bulletin supersedes SI B61 01 09 dated March 2009.
SUBJECT
[NEW] Windshield Washer Malfunctions
MODEL
All
[NEW] INFORMATION
The washer fluid mixture ratio is regulated by the U.S. EPA and many individual states; do not exceed the allowable washer fluid "dilution/ratio
limits" that apply. Follow the usage instructions on the washer fluid container. Only use BMWs Windshield Washer Concentrate or the equivalent.
[NEW] SITUATION
The windshield washer jets spray a very low volume of fluid or no fluid at all.
[NEW] CAUSE
Situation 1
A buildup of excess manufacturing-related materials on the windshield washer pump strainer. This primarily occurs on lower mileage vehicles.
Situation 2
A buildup of an organic "algae-like" substance on the windshield washer pump strainer. The algae-like substance is typically caused by using only
water in the washer fluid tank.
^ The customer must be instructed to only fill the windshield washer fluid tank with the appropriate "mixture" of Windshield Washer Concentrate
and water."
Situation 3
The windshield washer pump strainer is damaged because of using the "incorrect type" of cleaning fluid or one which contains an excessive and
incorrect amount of washer fluid concentrate.
Note:
Attempting to use the windshield washers when the washer fluid reservoir is empty or when the strainer is clogged will damage the washer pump.
[NEW] PROCEDURE
1. Remove the washer fluid pump per ISTA Repair Instructions 61 71 100 and inspect the strainer.
2. Any remaining fluid in the washer fluid reservoir must be drained and properly discarded. Clean the reservoir tank as necessary.
3. Replace the strainer, which is installed on the intake side of the pump, as required.
4. Do not replace the washer pump, reservoir tank or windshield nozzles, provided they are still functioning properly.
5. Refill the washer fluid reservoir with the allowable ratio of approved BMW Windshield Washer Concentrate and water.
[NEW] PARTS INFORMATION
2010-2020 BMW 550i Sedan (E60) V8-4.8L (N62TU) Page 31
[NEW] WARRANTY INFORMATION
Claims for non-approved ZF transmission repairs, including consequential repairs, will not be accepted. 2010-2020 BMW 535i Technical Service Bulletin # 610109
Date: 120601
Wipers/Washers - Windshield Washer Malfunctions
SI B61 01 09
General Electrical Systems
2010-2020 BMW 535i Sedan (E60) L6-3.0L Turbo (N54) Page 32
June 2012
Technical Service
This Service Information bulletin supersedes SI B61 01 09 dated March 2009.
SUBJECT
[NEW] Windshield Washer Malfunctions
MODEL
All
[NEW] INFORMATION
The washer fluid mixture ratio is regulated by the U.S. EPA and many individual states; do not exceed the allowable washer fluid "dilution/ratio
limits" that apply. Follow the usage instructions on the washer fluid container. Only use BMWs Windshield Washer Concentrate or the equivalent.
[NEW] SITUATION
The windshield washer jets spray a very low volume of fluid or no fluid at all.
[NEW] CAUSE
Situation 1
A buildup of excess manufacturing-related materials on the windshield washer pump strainer. This primarily occurs on lower mileage vehicles.
Situation 2
A buildup of an organic "algae-like" substance on the windshield washer pump strainer. The algae-like substance is typically caused by using only
water in the washer fluid tank.
^ The customer must be instructed to only fill the windshield washer fluid tank with the appropriate "mixture" of Windshield Washer Concentrate
and water."
Situation 3
The windshield washer pump strainer is damaged because of using the "incorrect type" of cleaning fluid or one which contains an excessive and
incorrect amount of washer fluid concentrate.
Note:
Attempting to use the windshield washers when the washer fluid reservoir is empty or when the strainer is clogged will damage the washer pump.
[NEW] PROCEDURE
1. Remove the washer fluid pump per ISTA Repair Instructions 61 71 100 and inspect the strainer.
2. Any remaining fluid in the washer fluid reservoir must be drained and properly discarded. Clean the reservoir tank as necessary.
3. Replace the strainer, which is installed on the intake side of the pump, as required.
4. Do not replace the washer pump, reservoir tank or windshield nozzles, provided they are still functioning properly.
5. Refill the washer fluid reservoir with the allowable ratio of approved BMW Windshield Washer Concentrate and water.
[NEW] PARTS INFORMATION
2010-2020 BMW 535i Sedan (E60) L6-3.0L Turbo (N54) Page 33
[NEW] WARRANTY INFORMATION
Claims for non-approved ZF transmission repairs, including consequential repairs, will not be accepted. 2010-2020 BMW 528i Technical Service Bulletin # 610109
Date: 120601
Wipers/Washers - Windshield Washer Malfunctions
SI B61 01 09
General Electrical Systems
2010-2020 BMW 528i (E60) L6-3.0L (N52K) Page 30
June 2012
Technical Service
This Service Information bulletin supersedes SI B61 01 09 dated March 2009.
SUBJECT
[NEW] Windshield Washer Malfunctions
MODEL
All
[NEW] INFORMATION
The washer fluid mixture ratio is regulated by the U.S. EPA and many individual states; do not exceed the allowable washer fluid "dilution/ratio
limits" that apply. Follow the usage instructions on the washer fluid container. Only use BMWs Windshield Washer Concentrate or the equivalent.
[NEW] SITUATION
The windshield washer jets spray a very low volume of fluid or no fluid at all.
[NEW] CAUSE
Situation 1
A buildup of excess manufacturing-related materials on the windshield washer pump strainer. This primarily occurs on lower mileage vehicles.
Situation 2
A buildup of an organic "algae-like" substance on the windshield washer pump strainer. The algae-like substance is typically caused by using only
water in the washer fluid tank.
^ The customer must be instructed to only fill the windshield washer fluid tank with the appropriate "mixture" of Windshield Washer Concentrate
and water."
Situation 3
The windshield washer pump strainer is damaged because of using the "incorrect type" of cleaning fluid or one which contains an excessive and
incorrect amount of washer fluid concentrate.
Note:
Attempting to use the windshield washers when the washer fluid reservoir is empty or when the strainer is clogged will damage the washer pump.
[NEW] PROCEDURE
1. Remove the washer fluid pump per ISTA Repair Instructions 61 71 100 and inspect the strainer.
2. Any remaining fluid in the washer fluid reservoir must be drained and properly discarded. Clean the reservoir tank as necessary.
3. Replace the strainer, which is installed on the intake side of the pump, as required.
4. Do not replace the washer pump, reservoir tank or windshield nozzles, provided they are still functioning properly.
5. Refill the washer fluid reservoir with the allowable ratio of approved BMW Windshield Washer Concentrate and water.
[NEW] PARTS INFORMATION
2010-2020 BMW 528i (E60) L6-3.0L (N52K) Page 31
[NEW] WARRANTY INFORMATION
Claims for non-approved ZF transmission repairs, including consequential repairs, will not be accepted. 2010-2020 BMW 335i Technical Service Bulletin # 610109
Date: 120601
Wipers/Washers - Windshield Washer Malfunctions
SI B61 01 09
General Electrical Systems
June 2012
Technical Service
This Service Information bulletin supersedes SI B61 01 09 dated March 2009.
SUBJECT
[NEW] Windshield Washer Malfunctions
MODEL
All
[NEW] INFORMATION
The washer fluid mixture ratio is regulated by the U.S. EPA and many individual states; do not exceed the allowable washer fluid "dilution/ratio
limits" that apply. Follow the usage instructions on the washer fluid container. Only use BMWs Windshield Washer Concentrate or the equivalent.
[NEW] SITUATION
The windshield washer jets spray a very low volume of fluid or no fluid at all.
[NEW] CAUSE
Situation 1
2010-2020 BMW 335i Sedan (E90) L6-3.0L Turbo (N54) Page 41
A buildup of excess manufacturing-related materials on the windshield washer pump strainer. This primarily occurs on lower mileage vehicles.
Situation 2
A buildup of an organic "algae-like" substance on the windshield washer pump strainer. The algae-like substance is typically caused by using only
water in the washer fluid tank.
^ The customer must be instructed to only fill the windshield washer fluid tank with the appropriate "mixture" of Windshield Washer Concentrate
and water."
Situation 3
The windshield washer pump strainer is damaged because of using the "incorrect type" of cleaning fluid or one which contains an excessive and
incorrect amount of washer fluid concentrate.
Note:
Attempting to use the windshield washers when the washer fluid reservoir is empty or when the strainer is clogged will damage the washer pump.
[NEW] PROCEDURE
1. Remove the washer fluid pump per ISTA Repair Instructions 61 71 100 and inspect the strainer.
2. Any remaining fluid in the washer fluid reservoir must be drained and properly discarded. Clean the reservoir tank as necessary.
3. Replace the strainer, which is installed on the intake side of the pump, as required.
4. Do not replace the washer pump, reservoir tank or windshield nozzles, provided they are still functioning properly.
5. Refill the washer fluid reservoir with the allowable ratio of approved BMW Windshield Washer Concentrate and water.
[NEW] PARTS INFORMATION
[NEW] WARRANTY INFORMATION
Claims for non-approved ZF transmission repairs, including consequential repairs, will not be accepted. 2010-2020 BMW 328XI Technical Service Bulletin # 240111
Date: 120601
A/T - Leak From Selector Shaft Seal
SI B24 01 11
Automatic Transmission
June 2012
Technical Service
This bulletin replaces SI B24 20 07 dated October 2007.
[NEW] designates changes to this revision
SUBJECT
6L45R Transmission with AWD Leaks from the Selector Shaft Seal
MODEL
E90, E91, E92, and X3 xDrive vehicles with N51 or N52K engines and the 6L45R transmission (GM6) produced from 6/1/2010 to 11/1/2010
SITUATION
Transmission oil is leaking from the selector shaft sealing cover on the left-hand side of the transmission. This can, at first glance, appear to be a
leaking transmission pan gasket.
CAUSE
A leaking or displaced selector shaft sealing cover located on the left side of the GM6 transmission
2010-2020 BMW 328xi Sedan AWD (E90) L6-3.0L (N52K) Page 39
CORRECTION
Replace the sealing cover as described in ISTA REP 2414005 - Replacing sealing cap for selector shaft (GA6L45R).
[NEW] Use the tool included in the kit and be careful about assembly direction.
[NEW] Check and top off the automatic transmission fluid as described in ISTA.
[NEW] A further 2-hour sealant curing time is then required before the vehicle should be driven.
Claims for non-approved ZF transmission repairs, including consequential repairs, will not be accepted. 2010-2020 BMW 328i Technical Service Bulletin # 240111
Date: 120601
A/T - Leak From Selector Shaft Seal
SI B24 01 11
Automatic Transmission
June 2012
Technical Service
This bulletin replaces SI B24 20 07 dated October 2007.
[NEW] designates changes to this revision
SUBJECT
6L45R Transmission with AWD Leaks from the Selector Shaft Seal
MODEL
E90, E91, E92, and X3 xDrive vehicles with N51 or N52K engines and the 6L45R transmission (GM6) produced from 6/1/2010 to 11/1/2010
SITUATION
Transmission oil is leaking from the selector shaft sealing cover on the left-hand side of the transmission. This can, at first glance, appear to be a
leaking transmission pan gasket.
CAUSE
A leaking or displaced selector shaft sealing cover located on the left side of the GM6 transmission
2010-2020 BMW 328i Sedan (E90) L6-3.0L (N52K) Page 39
CORRECTION
Replace the sealing cover as described in ISTA REP 2414005 - Replacing sealing cap for selector shaft (GA6L45R).
[NEW] Use the tool included in the kit and be careful about assembly direction.
[NEW] Check and top off the automatic transmission fluid as described in ISTA.
[NEW] A further 2-hour sealant curing time is then required before the vehicle should be driven.
Claims for non-approved ZF transmission repairs, including consequential repairs, will not be accepted. 2010-2020 BMW 328Cic Technical Service Bulletin # 610109
Date: 120601
Wipers/Washers - Windshield Washer Malfunctions
SI B61 01 09
General Electrical Systems
June 2012
Technical Service
This Service Information bulletin supersedes SI B61 01 09 dated March 2009.
SUBJECT
[NEW] Windshield Washer Malfunctions
MODEL
All
[NEW] INFORMATION
The washer fluid mixture ratio is regulated by the U.S. EPA and many individual states; do not exceed the allowable washer fluid "dilution/ratio
limits" that apply. Follow the usage instructions on the washer fluid container. Only use BMWs Windshield Washer Concentrate or the equivalent.
[NEW] SITUATION
The windshield washer jets spray a very low volume of fluid or no fluid at all.
[NEW] CAUSE
Situation 1
2010-2020 BMW 328Cic Convertible (E93) L6-3.0L (N51) Page 37
A buildup of excess manufacturing-related materials on the windshield washer pump strainer. This primarily occurs on lower mileage vehicles.
Situation 2
A buildup of an organic "algae-like" substance on the windshield washer pump strainer. The algae-like substance is typically caused by using only
water in the washer fluid tank.
^ The customer must be instructed to only fill the windshield washer fluid tank with the appropriate "mixture" of Windshield Washer Concentrate
and water."
Situation 3
The windshield washer pump strainer is damaged because of using the "incorrect type" of cleaning fluid or one which contains an excessive and
incorrect amount of washer fluid concentrate.
Note:
Attempting to use the windshield washers when the washer fluid reservoir is empty or when the strainer is clogged will damage the washer pump.
[NEW] PROCEDURE
1. Remove the washer fluid pump per ISTA Repair Instructions 61 71 100 and inspect the strainer.
2. Any remaining fluid in the washer fluid reservoir must be drained and properly discarded. Clean the reservoir tank as necessary.
3. Replace the strainer, which is installed on the intake side of the pump, as required.
4. Do not replace the washer pump, reservoir tank or windshield nozzles, provided they are still functioning properly.
5. Refill the washer fluid reservoir with the allowable ratio of approved BMW Windshield Washer Concentrate and water.
[NEW] PARTS INFORMATION
[NEW] WARRANTY INFORMATION
Claims for non-approved ZF transmission repairs, including consequential repairs, will not be accepted. 2010-2020 BMW 323i Technical Service Bulletin # 610109
Date: 120601
Wipers/Washers - Windshield Washer Malfunctions
SI B61 01 09
General Electrical Systems
June 2012
Technical Service
This Service Information bulletin supersedes SI B61 01 09 dated March 2009.
SUBJECT
[NEW] Windshield Washer Malfunctions
MODEL
All
[NEW] INFORMATION
The washer fluid mixture ratio is regulated by the U.S. EPA and many individual states; do not exceed the allowable washer fluid "dilution/ratio
limits" that apply. Follow the usage instructions on the washer fluid container. Only use BMWs Windshield Washer Concentrate or the equivalent.
[NEW] SITUATION
The windshield washer jets spray a very low volume of fluid or no fluid at all.
[NEW] CAUSE
Situation 1
2010-2020 BMW 323i Sedan (E90) (CANADA) L6-2.5L (N52) Page 9
A buildup of excess manufacturing-related materials on the windshield washer pump strainer. This primarily occurs on lower mileage vehicles.
Situation 2
A buildup of an organic "algae-like" substance on the windshield washer pump strainer. The algae-like substance is typically caused by using only
water in the washer fluid tank.
^ The customer must be instructed to only fill the windshield washer fluid tank with the appropriate "mixture" of Windshield Washer Concentrate
and water."
Situation 3
The windshield washer pump strainer is damaged because of using the "incorrect type" of cleaning fluid or one which contains an excessive and
incorrect amount of washer fluid concentrate.
Note:
Attempting to use the windshield washers when the washer fluid reservoir is empty or when the strainer is clogged will damage the washer pump.
[NEW] PROCEDURE
1. Remove the washer fluid pump per ISTA Repair Instructions 61 71 100 and inspect the strainer.
2. Any remaining fluid in the washer fluid reservoir must be drained and properly discarded. Clean the reservoir tank as necessary.
3. Replace the strainer, which is installed on the intake side of the pump, as required.
4. Do not replace the washer pump, reservoir tank or windshield nozzles, provided they are still functioning properly.
5. Refill the washer fluid reservoir with the allowable ratio of approved BMW Windshield Washer Concentrate and water.
[NEW] PARTS INFORMATION
[NEW] WARRANTY INFORMATION
Claims for non-approved ZF transmission repairs, including consequential repairs, will not be accepted. 2010-2020 BMW 135i Technical Service Bulletin # 610109
Date: 120601
Wipers/Washers - Windshield Washer Malfunctions
SI B61 01 09
General Electrical Systems
June 2012
Technical Service
This Service Information bulletin supersedes SI B61 01 09 dated March 2009.
SUBJECT
[NEW] Windshield Washer Malfunctions
MODEL
All
[NEW] INFORMATION
The washer fluid mixture ratio is regulated by the U.S. EPA and many individual states; do not exceed the allowable washer fluid "dilution/ratio
limits" that apply. Follow the usage instructions on the washer fluid container. Only use BMWs Windshield Washer Concentrate or the equivalent.
[NEW] SITUATION
The windshield washer jets spray a very low volume of fluid or no fluid at all.
2010-2020 BMW 135i Convertible (E88) L6-3.0L Turbo (N54) Page 53
[NEW] CAUSE
Situation 1
A buildup of excess manufacturing-related materials on the windshield washer pump strainer. This primarily occurs on lower mileage vehicles.
Situation 2
A buildup of an organic "algae-like" substance on the windshield washer pump strainer. The algae-like substance is typically caused by using only
water in the washer fluid tank.
^ The customer must be instructed to only fill the windshield washer fluid tank with the appropriate "mixture" of Windshield Washer Concentrate
and water."
Situation 3
The windshield washer pump strainer is damaged because of using the "incorrect type" of cleaning fluid or one which contains an excessive and
incorrect amount of washer fluid concentrate.
Note:
Attempting to use the windshield washers when the washer fluid reservoir is empty or when the strainer is clogged will damage the washer pump.
[NEW] PROCEDURE
1. Remove the washer fluid pump per ISTA Repair Instructions 61 71 100 and inspect the strainer.
2. Any remaining fluid in the washer fluid reservoir must be drained and properly discarded. Clean the reservoir tank as necessary.
3. Replace the strainer, which is installed on the intake side of the pump, as required.
4. Do not replace the washer pump, reservoir tank or windshield nozzles, provided they are still functioning properly.
5. Refill the washer fluid reservoir with the allowable ratio of approved BMW Windshield Washer Concentrate and water.
[NEW] PARTS INFORMATION
[NEW] WARRANTY INFORMATION
2010-2020 BMW 135i Convertible (E88) L6-3.0L Turbo (N54) Page 54
Claims for non-approved ZF transmission repairs, including consequential repairs, will not be accepted. 2010-2020 BMW 128i Technical Service Bulletin # 610109
Date: 120601
Wipers/Washers - Windshield Washer Malfunctions
SI B61 01 09
General Electrical Systems
June 2012
Technical Service
This Service Information bulletin supersedes SI B61 01 09 dated March 2009.
SUBJECT
[NEW] Windshield Washer Malfunctions
MODEL
All
[NEW] INFORMATION
The washer fluid mixture ratio is regulated by the U.S. EPA and many individual states; do not exceed the allowable washer fluid "dilution/ratio
limits" that apply. Follow the usage instructions on the washer fluid container. Only use BMWs Windshield Washer Concentrate or the equivalent.
[NEW] SITUATION
The windshield washer jets spray a very low volume of fluid or no fluid at all.
2010-2020 BMW 128i Convertible (E88) L6-3.0L (N51) Page 51
[NEW] CAUSE
Situation 1
A buildup of excess manufacturing-related materials on the windshield washer pump strainer. This primarily occurs on lower mileage vehicles.
Situation 2
A buildup of an organic "algae-like" substance on the windshield washer pump strainer. The algae-like substance is typically caused by using only
water in the washer fluid tank.
^ The customer must be instructed to only fill the windshield washer fluid tank with the appropriate "mixture" of Windshield Washer Concentrate
and water."
Situation 3
The windshield washer pump strainer is damaged because of using the "incorrect type" of cleaning fluid or one which contains an excessive and
incorrect amount of washer fluid concentrate.
Note:
Attempting to use the windshield washers when the washer fluid reservoir is empty or when the strainer is clogged will damage the washer pump.
[NEW] PROCEDURE
1. Remove the washer fluid pump per ISTA Repair Instructions 61 71 100 and inspect the strainer.
2. Any remaining fluid in the washer fluid reservoir must be drained and properly discarded. Clean the reservoir tank as necessary.
3. Replace the strainer, which is installed on the intake side of the pump, as required.
4. Do not replace the washer pump, reservoir tank or windshield nozzles, provided they are still functioning properly.
5. Refill the washer fluid reservoir with the allowable ratio of approved BMW Windshield Washer Concentrate and water.
[NEW] PARTS INFORMATION
[NEW] WARRANTY INFORMATION
2010-2020 BMW 128i Convertible (E88) L6-3.0L (N51) Page 52