☰
items. ▼ View Cart

New

Current

Showing posts with label 120101. Show all posts
Showing posts with label 120101. Show all posts

2010-2020 BMW 750i Technical Service Bulletin # 620611 Date: 120101

2010-2020 BMW 750i Technical Service Bulletin # 620611 Date: 120101

Instruments - Fuel Consumption Display Change

SI B62 06 11

Instruments

January 2012

Technical Service

SUBJECT

Fuel Consumption Display - Visual Change After Programming

MODEL

F01, F02, F04 (7 Series)

F07 (5 Series Gran Turismo)

F10 (5 Series)

F25 (X3)

Vehicles produced before 08/30/2011

SITUATION

When the vehicle is being programmed with ISTA/P 2.44.0 or higher, the fuel consumption display in the instrument cluster will have a thin yellow

line above the red area of the fuel consumption display.

2020-2020 BMW 750i (F01) V8-4.4L Turbo (N63) Page 113

CAUSE

This was a design change introduced with model year 2012 vehicles (09/201 1), and will be retrofitted into earlier produced vehicles when

programmed.

PROCEDURE

Do not replace parts and do not attempt to perform a repair!

Inform the customer of the change to the display.

NOTE:

It is not possible to perform programming without this changeover taking place.

It is also not possible to reverse this changeover.

B210110_Dual_Mass_Flywheel_Inspection2010-2020 BMW 535i Technical Service Bulletin # 122010 Date: 120101

B210110_Dual_Mass_Flywheel_Inspection2010-2020 BMW 535i Technical Service Bulletin # 122010 Date: 120101

Fuel System - MIL ON Or Check Gas Cap Is Illuminated

SI B12 20 10

Engine Electrical Systems

January 2012

Technical Service

This Service Information bulletin supersedes SI B12 20 10 dated September 2011.

[NEW] designates changes to this revision

SUBJECT

Service Engine Soon Lamp or Check Gas Cap Is Illuminated

MODEL

E82 and E88 (1 Series) N51, N52K, N54, N54T and N55 engines up to 5/2011 production

E90, E91, E92 and E93 (3 Series) with N51, N52, N52K, N54, N54T and N55 engines production up to 5/2011 production

E60 and E61 (5 Series) with N52, N52K and N54 engines all production

E70 and E72 (X5 and X5 M) with N52K, N55, N63 and S63 engines up to 5/2011 production

E71 (X6) with N54, N55, N63 and S63 engines up to 5/2011 production

E83 (X3) with N52K engine up to 5/2011 production

E85 and E86 (Z4) with N52K engine up to 5/2011 production

E89 (Z4) with N52K, N54 and N54T engines up to 5/2011 production

F01, F02 and F04 (7 Series) with N54 and N63 engines up to 5/2011 production

F07 (5 Series Gran Turismo) with N55 and N63 engines up to 5/2011 production

F10 (5 Series) with N52T, N55 and N63 engines up to 5/2011 production

F12 and F13 (6 Series) with N63 engine up to 5/2011 production

F25 (X3) with N52T and N55 engines up to 5/2011 production

SITUATION

The customer states that the Service Engine Soon lamp is illuminated. When diagnosed, one of the following faults is stored in the DME fault

memory:

^ DMTL Tank Leakage: Fine leak fault codes 3140, 321C, 2A15, 2B25, 190200, 190201

^ DMTL Tank Leakage: Super fine leak fault codes 3141, 321D, 2A16, 2A14, 2B28, 190300, 190302

CAUSE

Incorrectly installed fuel cap, evaporative system leakage or tank ventilation valve (TEV) that has been jammed open.

PROCEDURE

1. For all vehicles outlined above, perform the applicable test plan diagnosis module for the tank leak DMTL, and follow the attached diagnostic

fault tree for the fault(s) stored.

If a leakage is found, continue following the test plan to find the resolution. Refer to SI B16 01 07 for troubleshooting procedures, using the

VACUTEC(R) Smoke Machine 625-522B-BMW.

2. If no tank leakage is found using the applicable test plan and the attached diagnostic fault tree, then review the vehicle history. If this is the first

time for this complaint and the vehicle history does not indicate a single instance of the Service Engine Soon (SES) lamp illumination in the past for

any complaint, then:

Do not replace any parts and do not initiate a smoke test of the evaporative system.

2010-2020 BMW 535i Sedan (E60) L6-3.0L Turbo (N54) Page 515

Confirm the operation of the fuel cap and advise the customer of the importance of installing the fuel cap properly to avoid tank leakage faults

(see attached diagnostic fault tree for additional customer information).

If the vehicle has had the Service Engine Soon lamp illuminated in the past and no tank leakage is currently present using the applicable test plan,

proceed to step 3.

3. Replace the tank ventilation valve only if the vehicle was produced prior to 5/2011 and the tank ventilation valve has not already been replaced

since 5/2011. Refer to REP 13 90 500 for replacement procedures.

[NEW] Note:

TeileClearing authorization is no longer required for the tank ventilation valve replacement procedure described in this bulletin.

PARTS INFORMATION FOR REPEAT VISIT ONLY

Refer to the current version of EPC for the latest available replacement tank ventilation valve part number.

WARRANTY INFORMATION

ATTACHMENTS

2010-2020 BMW 535i Sedan (E60) L6-3.0L Turbo (N54) Page 516

Diagnostic Fault Tree - Tank Ventilation Valve (Purge Valve)

2010-2020 BMW 535i Sedan (E60) L6-3.0L Turbo (N54) Page 517

Diagnostic Fault Tree: EVAP System Overview

B210110_Dual_Mass_Flywheel_Inspection2010-2020 BMW 528i Technical Service Bulletin # 122010 Date: 120101

B210110_Dual_Mass_Flywheel_Inspection2010-2020 BMW 528i Technical Service Bulletin # 122010 Date: 120101

Fuel System - MIL ON Or Check Gas Cap Is Illuminated

SI B12 20 10

Engine Electrical Systems

January 2012

Technical Service

This Service Information bulletin supersedes SI B12 20 10 dated September 2011.

[NEW] designates changes to this revision

SUBJECT

Service Engine Soon Lamp or Check Gas Cap Is Illuminated

MODEL

E82 and E88 (1 Series) N51, N52K, N54, N54T and N55 engines up to 5/2011 production

E90, E91, E92 and E93 (3 Series) with N51, N52, N52K, N54, N54T and N55 engines production up to 5/2011 production

E60 and E61 (5 Series) with N52, N52K and N54 engines all production

E70 and E72 (X5 and X5 M) with N52K, N55, N63 and S63 engines up to 5/2011 production

E71 (X6) with N54, N55, N63 and S63 engines up to 5/2011 production

E83 (X3) with N52K engine up to 5/2011 production

E85 and E86 (Z4) with N52K engine up to 5/2011 production

E89 (Z4) with N52K, N54 and N54T engines up to 5/2011 production

F01, F02 and F04 (7 Series) with N54 and N63 engines up to 5/2011 production

F07 (5 Series Gran Turismo) with N55 and N63 engines up to 5/2011 production

F10 (5 Series) with N52T, N55 and N63 engines up to 5/2011 production

F12 and F13 (6 Series) with N63 engine up to 5/2011 production

F25 (X3) with N52T and N55 engines up to 5/2011 production

SITUATION

The customer states that the Service Engine Soon lamp is illuminated. When diagnosed, one of the following faults is stored in the DME fault

memory:

^ DMTL Tank Leakage: Fine leak fault codes 3140, 321C, 2A15, 2B25, 190200, 190201

^ DMTL Tank Leakage: Super fine leak fault codes 3141, 321D, 2A16, 2A14, 2B28, 190300, 190302

CAUSE

Incorrectly installed fuel cap, evaporative system leakage or tank ventilation valve (TEV) that has been jammed open.

PROCEDURE

1. For all vehicles outlined above, perform the applicable test plan diagnosis module for the tank leak DMTL, and follow the attached diagnostic

fault tree for the fault(s) stored.

If a leakage is found, continue following the test plan to find the resolution. Refer to SI B16 01 07 for troubleshooting procedures, using the

VACUTEC(R) Smoke Machine 625-522B-BMW.

2. If no tank leakage is found using the applicable test plan and the attached diagnostic fault tree, then review the vehicle history. If this is the first

time for this complaint and the vehicle history does not indicate a single instance of the Service Engine Soon (SES) lamp illumination in the past for

any complaint, then:

Do not replace any parts and do not initiate a smoke test of the evaporative system.

2010-2020 BMW 528i (E60) L6-3.0L (N52K) Page 457

Confirm the operation of the fuel cap and advise the customer of the importance of installing the fuel cap properly to avoid tank leakage faults

(see attached diagnostic fault tree for additional customer information).

If the vehicle has had the Service Engine Soon lamp illuminated in the past and no tank leakage is currently present using the applicable test plan,

proceed to step 3.

3. Replace the tank ventilation valve only if the vehicle was produced prior to 5/2011 and the tank ventilation valve has not already been replaced

since 5/2011. Refer to REP 13 90 500 for replacement procedures.

[NEW] Note:

TeileClearing authorization is no longer required for the tank ventilation valve replacement procedure described in this bulletin.

PARTS INFORMATION FOR REPEAT VISIT ONLY

Refer to the current version of EPC for the latest available replacement tank ventilation valve part number.

WARRANTY INFORMATION

ATTACHMENTS

2010-2020 BMW 528i (E60) L6-3.0L (N52K) Page 458

Diagnostic Fault Tree - Tank Ventilation Valve (Purge Valve)

2010-2020 BMW 528i (E60) L6-3.0L (N52K) Page 459

Diagnostic Fault Tree: EVAP System Overview

B210110_Dual_Mass_Flywheel_Inspection2010-2020 BMW 335i Technical Service Bulletin # 122010 Date: 120101

B210110_Dual_Mass_Flywheel_Inspection2010-2020 BMW 335i Technical Service Bulletin # 122010 Date: 120101

Fuel System - MIL ON Or Check Gas Cap Is Illuminated

SI B12 20 10

Engine Electrical Systems

January 2012

Technical Service

This Service Information bulletin supersedes SI B12 20 10 dated September 2011.

[NEW] designates changes to this revision

SUBJECT

Service Engine Soon Lamp or Check Gas Cap Is Illuminated

MODEL

E82 and E88 (1 Series) N51, N52K, N54, N54T and N55 engines up to 5/2011 production

E90, E91, E92 and E93 (3 Series) with N51, N52, N52K, N54, N54T and N55 engines production up to 5/2011 production

E60 and E61 (5 Series) with N52, N52K and N54 engines all production

E70 and E72 (X5 and X5 M) with N52K, N55, N63 and S63 engines up to 5/2011 production

E71 (X6) with N54, N55, N63 and S63 engines up to 5/2011 production

E83 (X3) with N52K engine up to 5/2011 production

E85 and E86 (Z4) with N52K engine up to 5/2011 production

E89 (Z4) with N52K, N54 and N54T engines up to 5/2011 production

F01, F02 and F04 (7 Series) with N54 and N63 engines up to 5/2011 production

F07 (5 Series Gran Turismo) with N55 and N63 engines up to 5/2011 production

F10 (5 Series) with N52T, N55 and N63 engines up to 5/2011 production

F12 and F13 (6 Series) with N63 engine up to 5/2011 production

F25 (X3) with N52T and N55 engines up to 5/2011 production

SITUATION

The customer states that the Service Engine Soon lamp is illuminated. When diagnosed, one of the following faults is stored in the DME fault

memory:

^ DMTL Tank Leakage: Fine leak fault codes 3140, 321C, 2A15, 2B25, 190200, 190201

^ DMTL Tank Leakage: Super fine leak fault codes 3141, 321D, 2A16, 2A14, 2B28, 190300, 190302

CAUSE

Incorrectly installed fuel cap, evaporative system leakage or tank ventilation valve (TEV) that has been jammed open.

PROCEDURE

1. For all vehicles outlined above, perform the applicable test plan diagnosis module for the tank leak DMTL, and follow the attached diagnostic

fault tree for the fault(s) stored.

If a leakage is found, continue following the test plan to find the resolution. Refer to SI B16 01 07 for troubleshooting procedures, using the

VACUTEC(R) Smoke Machine 625-522B-BMW.

2. If no tank leakage is found using the applicable test plan and the attached diagnostic fault tree, then review the vehicle history. If this is the first

time for this complaint and the vehicle history does not indicate a single instance of the Service Engine Soon (SES) lamp illumination in the past for

any complaint, then:

Do not replace any parts and do not initiate a smoke test of the evaporative system.

2010-2020 BMW 335i Sedan (E90) L6-3.0L Turbo (N54) Page 453

Confirm the operation of the fuel cap and advise the customer of the importance of installing the fuel cap properly to avoid tank leakage faults

(see attached diagnostic fault tree for additional customer information).

If the vehicle has had the Service Engine Soon lamp illuminated in the past and no tank leakage is currently present using the applicable test plan,

proceed to step 3.

3. Replace the tank ventilation valve only if the vehicle was produced prior to 5/2011 and the tank ventilation valve has not already been replaced

since 5/2011. Refer to REP 13 90 500 for replacement procedures.

[NEW] Note:

TeileClearing authorization is no longer required for the tank ventilation valve replacement procedure described in this bulletin.

PARTS INFORMATION FOR REPEAT VISIT ONLY

Refer to the current version of EPC for the latest available replacement tank ventilation valve part number.

WARRANTY INFORMATION

ATTACHMENTS

2010-2020 BMW 335i Sedan (E90) L6-3.0L Turbo (N54) Page 454

Diagnostic Fault Tree - Tank Ventilation Valve (Purge Valve)

2010-2020 BMW 335i Sedan (E90) L6-3.0L Turbo (N54) Page 455

Diagnostic Fault Tree: EVAP System Overview

B210110_Dual_Mass_Flywheel_Inspection2010-2020 BMW 328XI Technical Service Bulletin # 122010 Date: 120101

B210110_Dual_Mass_Flywheel_Inspection2010-2020 BMW 328XI Technical Service Bulletin # 122010 Date: 120101

Fuel System - MIL ON Or Check Gas Cap Is Illuminated

SI B12 20 10

Engine Electrical Systems

January 2012

Technical Service

This Service Information bulletin supersedes SI B12 20 10 dated September 2011.

[NEW] designates changes to this revision

SUBJECT

Service Engine Soon Lamp or Check Gas Cap Is Illuminated

MODEL

E82 and E88 (1 Series) N51, N52K, N54, N54T and N55 engines up to 5/2011 production

E90, E91, E92 and E93 (3 Series) with N51, N52, N52K, N54, N54T and N55 engines production up to 5/2011 production

E60 and E61 (5 Series) with N52, N52K and N54 engines all production

E70 and E72 (X5 and X5 M) with N52K, N55, N63 and S63 engines up to 5/2011 production

E71 (X6) with N54, N55, N63 and S63 engines up to 5/2011 production

E83 (X3) with N52K engine up to 5/2011 production

E85 and E86 (Z4) with N52K engine up to 5/2011 production

E89 (Z4) with N52K, N54 and N54T engines up to 5/2011 production

F01, F02 and F04 (7 Series) with N54 and N63 engines up to 5/2011 production

F07 (5 Series Gran Turismo) with N55 and N63 engines up to 5/2011 production

F10 (5 Series) with N52T, N55 and N63 engines up to 5/2011 production

F12 and F13 (6 Series) with N63 engine up to 5/2011 production

F25 (X3) with N52T and N55 engines up to 5/2011 production

SITUATION

The customer states that the Service Engine Soon lamp is illuminated. When diagnosed, one of the following faults is stored in the DME fault

memory:

^ DMTL Tank Leakage: Fine leak fault codes 3140, 321C, 2A15, 2B25, 190200, 190201

^ DMTL Tank Leakage: Super fine leak fault codes 3141, 321D, 2A16, 2A14, 2B28, 190300, 190302

CAUSE

Incorrectly installed fuel cap, evaporative system leakage or tank ventilation valve (TEV) that has been jammed open.

PROCEDURE

1. For all vehicles outlined above, perform the applicable test plan diagnosis module for the tank leak DMTL, and follow the attached diagnostic

fault tree for the fault(s) stored.

If a leakage is found, continue following the test plan to find the resolution. Refer to SI B16 01 07 for troubleshooting procedures, using the

VACUTEC(R) Smoke Machine 625-522B-BMW.

2. If no tank leakage is found using the applicable test plan and the attached diagnostic fault tree, then review the vehicle history. If this is the first

time for this complaint and the vehicle history does not indicate a single instance of the Service Engine Soon (SES) lamp illumination in the past for

any complaint, then:

Do not replace any parts and do not initiate a smoke test of the evaporative system.

2010-2020 BMW 328xi Sedan AWD (E90) L6-3.0L (N52K) Page 392

Confirm the operation of the fuel cap and advise the customer of the importance of installing the fuel cap properly to avoid tank leakage faults

(see attached diagnostic fault tree for additional customer information).

If the vehicle has had the Service Engine Soon lamp illuminated in the past and no tank leakage is currently present using the applicable test plan,

proceed to step 3.

3. Replace the tank ventilation valve only if the vehicle was produced prior to 5/2011 and the tank ventilation valve has not already been replaced

since 5/2011. Refer to REP 13 90 500 for replacement procedures.

[NEW] Note:

TeileClearing authorization is no longer required for the tank ventilation valve replacement procedure described in this bulletin.

PARTS INFORMATION FOR REPEAT VISIT ONLY

Refer to the current version of EPC for the latest available replacement tank ventilation valve part number.

WARRANTY INFORMATION

ATTACHMENTS

2010-2020 BMW 328xi Sedan AWD (E90) L6-3.0L (N52K) Page 393

Diagnostic Fault Tree - Tank Ventilation Valve (Purge Valve)

2010-2020 BMW 328xi Sedan AWD (E90) L6-3.0L (N52K) Page 394

Diagnostic Fault Tree: EVAP System Overview

B210110_Dual_Mass_Flywheel_Inspection2010-2020 BMW 328i Technical Service Bulletin # 122010 Date: 120101

B210110_Dual_Mass_Flywheel_Inspection2010-2020 BMW 328i Technical Service Bulletin # 122010 Date: 120101

Fuel System - MIL ON Or Check Gas Cap Is Illuminated

SI B12 20 10

Engine Electrical Systems

January 2012

Technical Service

This Service Information bulletin supersedes SI B12 20 10 dated September 2011.

[NEW] designates changes to this revision

SUBJECT

Service Engine Soon Lamp or Check Gas Cap Is Illuminated

MODEL

E82 and E88 (1 Series) N51, N52K, N54, N54T and N55 engines up to 5/2011 production

E90, E91, E92 and E93 (3 Series) with N51, N52, N52K, N54, N54T and N55 engines production up to 5/2011 production

E60 and E61 (5 Series) with N52, N52K and N54 engines all production

E70 and E72 (X5 and X5 M) with N52K, N55, N63 and S63 engines up to 5/2011 production

E71 (X6) with N54, N55, N63 and S63 engines up to 5/2011 production

E83 (X3) with N52K engine up to 5/2011 production

E85 and E86 (Z4) with N52K engine up to 5/2011 production

E89 (Z4) with N52K, N54 and N54T engines up to 5/2011 production

F01, F02 and F04 (7 Series) with N54 and N63 engines up to 5/2011 production

F07 (5 Series Gran Turismo) with N55 and N63 engines up to 5/2011 production

F10 (5 Series) with N52T, N55 and N63 engines up to 5/2011 production

F12 and F13 (6 Series) with N63 engine up to 5/2011 production

F25 (X3) with N52T and N55 engines up to 5/2011 production

SITUATION

The customer states that the Service Engine Soon lamp is illuminated. When diagnosed, one of the following faults is stored in the DME fault

memory:

^ DMTL Tank Leakage: Fine leak fault codes 3140, 321C, 2A15, 2B25, 190200, 190201

^ DMTL Tank Leakage: Super fine leak fault codes 3141, 321D, 2A16, 2A14, 2B28, 190300, 190302

CAUSE

Incorrectly installed fuel cap, evaporative system leakage or tank ventilation valve (TEV) that has been jammed open.

PROCEDURE

1. For all vehicles outlined above, perform the applicable test plan diagnosis module for the tank leak DMTL, and follow the attached diagnostic

fault tree for the fault(s) stored.

If a leakage is found, continue following the test plan to find the resolution. Refer to SI B16 01 07 for troubleshooting procedures, using the

VACUTEC(R) Smoke Machine 625-522B-BMW.

2. If no tank leakage is found using the applicable test plan and the attached diagnostic fault tree, then review the vehicle history. If this is the first

time for this complaint and the vehicle history does not indicate a single instance of the Service Engine Soon (SES) lamp illumination in the past for

any complaint, then:

Do not replace any parts and do not initiate a smoke test of the evaporative system.

2010-2020 BMW 328i Sedan (E90) L6-3.0L (N52K) Page 388

Confirm the operation of the fuel cap and advise the customer of the importance of installing the fuel cap properly to avoid tank leakage faults

(see attached diagnostic fault tree for additional customer information).

If the vehicle has had the Service Engine Soon lamp illuminated in the past and no tank leakage is currently present using the applicable test plan,

proceed to step 3.

3. Replace the tank ventilation valve only if the vehicle was produced prior to 5/2011 and the tank ventilation valve has not already been replaced

since 5/2011. Refer to REP 13 90 500 for replacement procedures.

[NEW] Note:

TeileClearing authorization is no longer required for the tank ventilation valve replacement procedure described in this bulletin.

PARTS INFORMATION FOR REPEAT VISIT ONLY

Refer to the current version of EPC for the latest available replacement tank ventilation valve part number.

WARRANTY INFORMATION

ATTACHMENTS

2010-2020 BMW 328i Sedan (E90) L6-3.0L (N52K) Page 389

Diagnostic Fault Tree - Tank Ventilation Valve (Purge Valve)

2010-2020 BMW 328i Sedan (E90) L6-3.0L (N52K) Page 390

Diagnostic Fault Tree: EVAP System Overview

B210110_Dual_Mass_Flywheel_Inspection2010-2020 BMW 328Cic Technical Service Bulletin # 122010 Date: 120101

B210110_Dual_Mass_Flywheel_Inspection2010-2020 BMW 328Cic Technical Service Bulletin # 122010 Date: 120101

Fuel System - MIL ON Or Check Gas Cap Is Illuminated

SI B12 20 10

Engine Electrical Systems

January 2012

Technical Service

This Service Information bulletin supersedes SI B12 20 10 dated September 2011.

[NEW] designates changes to this revision

SUBJECT

Service Engine Soon Lamp or Check Gas Cap Is Illuminated

MODEL

E82 and E88 (1 Series) N51, N52K, N54, N54T and N55 engines up to 5/2011 production

E90, E91, E92 and E93 (3 Series) with N51, N52, N52K, N54, N54T and N55 engines production up to 5/2011 production

E60 and E61 (5 Series) with N52, N52K and N54 engines all production

E70 and E72 (X5 and X5 M) with N52K, N55, N63 and S63 engines up to 5/2011 production

E71 (X6) with N54, N55, N63 and S63 engines up to 5/2011 production

E83 (X3) with N52K engine up to 5/2011 production

E85 and E86 (Z4) with N52K engine up to 5/2011 production

E89 (Z4) with N52K, N54 and N54T engines up to 5/2011 production

F01, F02 and F04 (7 Series) with N54 and N63 engines up to 5/2011 production

F07 (5 Series Gran Turismo) with N55 and N63 engines up to 5/2011 production

F10 (5 Series) with N52T, N55 and N63 engines up to 5/2011 production

F12 and F13 (6 Series) with N63 engine up to 5/2011 production

F25 (X3) with N52T and N55 engines up to 5/2011 production

SITUATION

The customer states that the Service Engine Soon lamp is illuminated. When diagnosed, one of the following faults is stored in the DME fault

memory:

^ DMTL Tank Leakage: Fine leak fault codes 3140, 321C, 2A15, 2B25, 190200, 190201

^ DMTL Tank Leakage: Super fine leak fault codes 3141, 321D, 2A16, 2A14, 2B28, 190300, 190302

CAUSE

Incorrectly installed fuel cap, evaporative system leakage or tank ventilation valve (TEV) that has been jammed open.

PROCEDURE

1. For all vehicles outlined above, perform the applicable test plan diagnosis module for the tank leak DMTL, and follow the attached diagnostic

fault tree for the fault(s) stored.

If a leakage is found, continue following the test plan to find the resolution. Refer to SI B16 01 07 for troubleshooting procedures, using the

VACUTEC(R) Smoke Machine 625-522B-BMW.

2. If no tank leakage is found using the applicable test plan and the attached diagnostic fault tree, then review the vehicle history. If this is the first

time for this complaint and the vehicle history does not indicate a single instance of the Service Engine Soon (SES) lamp illumination in the past for

any complaint, then:

Do not replace any parts and do not initiate a smoke test of the evaporative system.

2010-2020 BMW 328Cic Convertible (E93) L6-3.0L (N51) Page 409

Confirm the operation of the fuel cap and advise the customer of the importance of installing the fuel cap properly to avoid tank leakage faults

(see attached diagnostic fault tree for additional customer information).

If the vehicle has had the Service Engine Soon lamp illuminated in the past and no tank leakage is currently present using the applicable test plan,

proceed to step 3.

3. Replace the tank ventilation valve only if the vehicle was produced prior to 5/2011 and the tank ventilation valve has not already been replaced

since 5/2011. Refer to REP 13 90 500 for replacement procedures.

[NEW] Note:

TeileClearing authorization is no longer required for the tank ventilation valve replacement procedure described in this bulletin.

PARTS INFORMATION FOR REPEAT VISIT ONLY

Refer to the current version of EPC for the latest available replacement tank ventilation valve part number.

WARRANTY INFORMATION

ATTACHMENTS

2010-2020 BMW 328Cic Convertible (E93) L6-3.0L (N51) Page 410

Diagnostic Fault Tree - Tank Ventilation Valve (Purge Valve)

2010-2020 BMW 328Cic Convertible (E93) L6-3.0L (N51) Page 411

Diagnostic Fault Tree: EVAP System Overview

B210110_Dual_Mass_Flywheel_Inspection2010-2020 BMW 135i Technical Service Bulletin # 122010 Date: 120101

B210110_Dual_Mass_Flywheel_Inspection2010-2020 BMW 135i Technical Service Bulletin # 122010 Date: 120101

Fuel System - MIL ON Or Check Gas Cap Is Illuminated

SI B12 20 10

Engine Electrical Systems

January 2012

Technical Service

This Service Information bulletin supersedes SI B12 20 10 dated September 2011.

[NEW] designates changes to this revision

SUBJECT

Service Engine Soon Lamp or Check Gas Cap Is Illuminated

MODEL

E82 and E88 (1 Series) N51, N52K, N54, N54T and N55 engines up to 5/2011 production

E90, E91, E92 and E93 (3 Series) with N51, N52, N52K, N54, N54T and N55 engines production up to 5/2011 production

E60 and E61 (5 Series) with N52, N52K and N54 engines all production

E70 and E72 (X5 and X5 M) with N52K, N55, N63 and S63 engines up to 5/2011 production

E71 (X6) with N54, N55, N63 and S63 engines up to 5/2011 production

E83 (X3) with N52K engine up to 5/2011 production

E85 and E86 (Z4) with N52K engine up to 5/2011 production

E89 (Z4) with N52K, N54 and N54T engines up to 5/2011 production

F01, F02 and F04 (7 Series) with N54 and N63 engines up to 5/2011 production

F07 (5 Series Gran Turismo) with N55 and N63 engines up to 5/2011 production

F10 (5 Series) with N52T, N55 and N63 engines up to 5/2011 production

F12 and F13 (6 Series) with N63 engine up to 5/2011 production

F25 (X3) with N52T and N55 engines up to 5/2011 production

SITUATION

The customer states that the Service Engine Soon lamp is illuminated. When diagnosed, one of the following faults is stored in the DME fault

memory:

^ DMTL Tank Leakage: Fine leak fault codes 3140, 321C, 2A15, 2B25, 190200, 190201

^ DMTL Tank Leakage: Super fine leak fault codes 3141, 321D, 2A16, 2A14, 2B28, 190300, 190302

CAUSE

Incorrectly installed fuel cap, evaporative system leakage or tank ventilation valve (TEV) that has been jammed open.

PROCEDURE

1. For all vehicles outlined above, perform the applicable test plan diagnosis module for the tank leak DMTL, and follow the attached diagnostic

fault tree for the fault(s) stored.

If a leakage is found, continue following the test plan to find the resolution. Refer to SI B16 01 07 for troubleshooting procedures, using the

VACUTEC(R) Smoke Machine 625-522B-BMW.

2. If no tank leakage is found using the applicable test plan and the attached diagnostic fault tree, then review the vehicle history. If this is the first

time for this complaint and the vehicle history does not indicate a single instance of the Service Engine Soon (SES) lamp illumination in the past for

any complaint, then:

Do not replace any parts and do not initiate a smoke test of the evaporative system.

2010-2020 BMW 135i Convertible (E88) L6-3.0L Turbo (N54) Page 445

Confirm the operation of the fuel cap and advise the customer of the importance of installing the fuel cap properly to avoid tank leakage faults

(see attached diagnostic fault tree for additional customer information).

If the vehicle has had the Service Engine Soon lamp illuminated in the past and no tank leakage is currently present using the applicable test plan,

proceed to step 3.

3. Replace the tank ventilation valve only if the vehicle was produced prior to 5/2011 and the tank ventilation valve has not already been replaced

since 5/2011. Refer to REP 13 90 500 for replacement procedures.

[NEW] Note:

TeileClearing authorization is no longer required for the tank ventilation valve replacement procedure described in this bulletin.

PARTS INFORMATION FOR REPEAT VISIT ONLY

Refer to the current version of EPC for the latest available replacement tank ventilation valve part number.

WARRANTY INFORMATION

ATTACHMENTS

2010-2020 BMW 135i Convertible (E88) L6-3.0L Turbo (N54) Page 446

Diagnostic Fault Tree - Tank Ventilation Valve (Purge Valve)

2010-2020 BMW 135i Convertible (E88) L6-3.0L Turbo (N54) Page 447

Diagnostic Fault Tree: EVAP System Overview

B210110_Dual_Mass_Flywheel_Inspection2010-2020 BMW 128i Technical Service Bulletin # 122010 Date: 120101

B210110_Dual_Mass_Flywheel_Inspection2010-2020 BMW 128i Technical Service Bulletin # 122010 Date: 120101

Fuel System - MIL ON Or Check Gas Cap Is Illuminated

SI B12 20 10

Engine Electrical Systems

January 2012

Technical Service

This Service Information bulletin supersedes SI B12 20 10 dated September 2011.

[NEW] designates changes to this revision

SUBJECT

Service Engine Soon Lamp or Check Gas Cap Is Illuminated

MODEL

E82 and E88 (1 Series) N51, N52K, N54, N54T and N55 engines up to 5/2011 production

E90, E91, E92 and E93 (3 Series) with N51, N52, N52K, N54, N54T and N55 engines production up to 5/2011 production

E60 and E61 (5 Series) with N52, N52K and N54 engines all production

E70 and E72 (X5 and X5 M) with N52K, N55, N63 and S63 engines up to 5/2011 production

E71 (X6) with N54, N55, N63 and S63 engines up to 5/2011 production

E83 (X3) with N52K engine up to 5/2011 production

E85 and E86 (Z4) with N52K engine up to 5/2011 production

E89 (Z4) with N52K, N54 and N54T engines up to 5/2011 production

F01, F02 and F04 (7 Series) with N54 and N63 engines up to 5/2011 production

F07 (5 Series Gran Turismo) with N55 and N63 engines up to 5/2011 production

F10 (5 Series) with N52T, N55 and N63 engines up to 5/2011 production

F12 and F13 (6 Series) with N63 engine up to 5/2011 production

F25 (X3) with N52T and N55 engines up to 5/2011 production

SITUATION

The customer states that the Service Engine Soon lamp is illuminated. When diagnosed, one of the following faults is stored in the DME fault

memory:

^ DMTL Tank Leakage: Fine leak fault codes 3140, 321C, 2A15, 2B25, 190200, 190201

^ DMTL Tank Leakage: Super fine leak fault codes 3141, 321D, 2A16, 2A14, 2B28, 190300, 190302

CAUSE

Incorrectly installed fuel cap, evaporative system leakage or tank ventilation valve (TEV) that has been jammed open.

PROCEDURE

1. For all vehicles outlined above, perform the applicable test plan diagnosis module for the tank leak DMTL, and follow the attached diagnostic

fault tree for the fault(s) stored.

If a leakage is found, continue following the test plan to find the resolution. Refer to SI B16 01 07 for troubleshooting procedures, using the

VACUTEC(R) Smoke Machine 625-522B-BMW.

2. If no tank leakage is found using the applicable test plan and the attached diagnostic fault tree, then review the vehicle history. If this is the first

time for this complaint and the vehicle history does not indicate a single instance of the Service Engine Soon (SES) lamp illumination in the past for

any complaint, then:

Do not replace any parts and do not initiate a smoke test of the evaporative system.

2010-2020 BMW 128i Convertible (E88) L6-3.0L (N51) Page 417

Confirm the operation of the fuel cap and advise the customer of the importance of installing the fuel cap properly to avoid tank leakage faults

(see attached diagnostic fault tree for additional customer information).

If the vehicle has had the Service Engine Soon lamp illuminated in the past and no tank leakage is currently present using the applicable test plan,

proceed to step 3.

3. Replace the tank ventilation valve only if the vehicle was produced prior to 5/2011 and the tank ventilation valve has not already been replaced

since 5/2011. Refer to REP 13 90 500 for replacement procedures.

[NEW] Note:

TeileClearing authorization is no longer required for the tank ventilation valve replacement procedure described in this bulletin.

PARTS INFORMATION FOR REPEAT VISIT ONLY

Refer to the current version of EPC for the latest available replacement tank ventilation valve part number.

WARRANTY INFORMATION

ATTACHMENTS

2010-2020 BMW 128i Convertible (E88) L6-3.0L (N51) Page 418

Diagnostic Fault Tree - Tank Ventilation Valve (Purge Valve)

2010-2020 BMW 128i Convertible (E88) L6-3.0L (N51) Page 419

Diagnostic Fault Tree: EVAP System Overview

© E-commerce Blogger powered by 168 MOTIVE Shopping Mall . | Back To Top