☰
items. ▼ View Cart

New

Current

Showing posts with label 111190. Show all posts
Showing posts with label 111190. Show all posts

2010-2020 BMW 750i Technical Service Bulletin # 111190 Date: 120301

2010-2020 BMW 750i Technical Service Bulletin # 111190 Date: 120301

Engine - E Series Engine Oil Capacities

SI B11 11 90

Engine

March 2012

Technical Service

This Service Information bulletin supersedes SI B11 11 90 dated November 2011.

[NEW] designates changes to this revision

SUBJECT

Engine Oil Capacities

MODEL

All E Series except E12, E21 and E23

SITUATION

The attached [NEW] chart has been revised to show all engine oil capacities (with oil filter change) for current BMW engines, as well as earlier

production BMW engines. This information is also included in the technical data section of TIS and the Owner's Manual.

2020-2020 BMW 750i (F01) V8-4.4L Turbo (N63) Page 105

When checking the oil level after an oil change, the level should be in the upper third of the space between the MIN and MAX marks on the dipstick.

If the dipstick displays an improper reading after adding the specified amount of oil, first verify that the engine has the correct dipstick installed.

Refer to ETK for individual parts information.

BMW recommends checking the oil level and, if necessary, topping up, using the correct viscosity and quality specification whenever refilling is

required (refer to SI B11 08 98 for details).

M3, M Coupe, M Roadster (S54), M5 and Z8 (S62) Engine Oil Level Checking Procedure:

The S54 and S62 engines require a different procedure than conventional practice to check the oil level, which must be followed precisely for a true

indication of the oil fill level:

^ The engine must first be at full operating temperature.

^ Let the engine idle for at least 15 seconds.

^ Turn the engine off

^ Wait at least 1 minute for the oil to drain down into the sump.

^ Check the level using the dipstick.

[NEW] All NG6, N62TU, N63, S63, N74, S65 and S85 Engines

These engines are equipped with an electronic oil level check. Follow the procedure in the Owner's Manual for proper checking of the oil level.

WARRANTY INFORMATION

For information only

ATTACHMENTS

2020-2020 BMW 750i (F01) V8-4.4L Turbo (N63) Page 106

2010-2020 BMW 650i Technical Service Bulletin # 111190 Date: 120301

2010-2020 BMW 650i Technical Service Bulletin # 111190 Date: 120301

Engine - E Series Engine Oil Capacities

SI B11 11 90

Engine

March 2012

Technical Service

This Service Information bulletin supersedes SI B11 11 90 dated November 2011.

[NEW] designates changes to this revision

SUBJECT

Engine Oil Capacities

MODEL

All E Series except E12, E21 and E23

SITUATION

The attached [NEW] chart has been revised to show all engine oil capacities (with oil filter change) for current BMW engines, as well as earlier

production BMW engines. This information is also included in the technical data section of TIS and the Owner's Manual.

2020-2020 BMW 650i Coupe (E63) V8-4.8L (N62TU) Page 74

When checking the oil level after an oil change, the level should be in the upper third of the space between the MIN and MAX marks on the dipstick.

If the dipstick displays an improper reading after adding the specified amount of oil, first verify that the engine has the correct dipstick installed.

Refer to ETK for individual parts information.

BMW recommends checking the oil level and, if necessary, topping up, using the correct viscosity and quality specification whenever refilling is

required (refer to SI B11 08 98 for details).

M3, M Coupe, M Roadster (S54), M5 and Z8 (S62) Engine Oil Level Checking Procedure:

The S54 and S62 engines require a different procedure than conventional practice to check the oil level, which must be followed precisely for a true

indication of the oil fill level:

^ The engine must first be at full operating temperature.

^ Let the engine idle for at least 15 seconds.

^ Turn the engine off

^ Wait at least 1 minute for the oil to drain down into the sump.

^ Check the level using the dipstick.

[NEW] All NG6, N62TU, N63, S63, N74, S65 and S85 Engines

These engines are equipped with an electronic oil level check. Follow the procedure in the Owner's Manual for proper checking of the oil level.

WARRANTY INFORMATION

For information only

ATTACHMENTS

2020-2020 BMW 650i Coupe (E63) V8-4.8L (N62TU) Page 75

2010-2020 BMW 550i Technical Service Bulletin # 111190 Date: 120301

2010-2020 BMW 550i Technical Service Bulletin # 111190 Date: 120301

Engine - E Series Engine Oil Capacities

SI B11 11 90

Engine

March 2012

Technical Service

This Service Information bulletin supersedes SI B11 11 90 dated November 2011.

[NEW] designates changes to this revision

SUBJECT

Engine Oil Capacities

MODEL

All E Series except E12, E21 and E23

SITUATION

The attached [NEW] chart has been revised to show all engine oil capacities (with oil filter change) for current BMW engines, as well as earlier

production BMW engines. This information is also included in the technical data section of TIS and the Owner's Manual.

2010-2020 BMW 550i Sedan (E60) V8-4.8L (N62TU) Page 74

When checking the oil level after an oil change, the level should be in the upper third of the space between the MIN and MAX marks on the dipstick.

If the dipstick displays an improper reading after adding the specified amount of oil, first verify that the engine has the correct dipstick installed.

Refer to ETK for individual parts information.

BMW recommends checking the oil level and, if necessary, topping up, using the correct viscosity and quality specification whenever refilling is

required (refer to SI B11 08 98 for details).

M3, M Coupe, M Roadster (S54), M5 and Z8 (S62) Engine Oil Level Checking Procedure:

The S54 and S62 engines require a different procedure than conventional practice to check the oil level, which must be followed precisely for a true

indication of the oil fill level:

^ The engine must first be at full operating temperature.

^ Let the engine idle for at least 15 seconds.

^ Turn the engine off

^ Wait at least 1 minute for the oil to drain down into the sump.

^ Check the level using the dipstick.

[NEW] All NG6, N62TU, N63, S63, N74, S65 and S85 Engines

These engines are equipped with an electronic oil level check. Follow the procedure in the Owner's Manual for proper checking of the oil level.

WARRANTY INFORMATION

For information only

ATTACHMENTS

2010-2020 BMW 550i Sedan (E60) V8-4.8L (N62TU) Page 75

2010-2020 BMW 535i Technical Service Bulletin # 111190 Date: 120301

2010-2020 BMW 535i Technical Service Bulletin # 111190 Date: 120301

Engine - E Series Engine Oil Capacities

SI B11 11 90

Engine

March 2012

Technical Service

This Service Information bulletin supersedes SI B11 11 90 dated November 2011.

[NEW] designates changes to this revision

SUBJECT

Engine Oil Capacities

MODEL

All E Series except E12, E21 and E23

SITUATION

The attached [NEW] chart has been revised to show all engine oil capacities (with oil filter change) for current BMW engines, as well as earlier

production BMW engines. This information is also included in the technical data section of TIS and the Owner's Manual.

2010-2020 BMW 535i Sedan (E60) L6-3.0L Turbo (N54) Page 80

When checking the oil level after an oil change, the level should be in the upper third of the space between the MIN and MAX marks on the dipstick.

If the dipstick displays an improper reading after adding the specified amount of oil, first verify that the engine has the correct dipstick installed.

Refer to ETK for individual parts information.

BMW recommends checking the oil level and, if necessary, topping up, using the correct viscosity and quality specification whenever refilling is

required (refer to SI B11 08 98 for details).

M3, M Coupe, M Roadster (S54), M5 and Z8 (S62) Engine Oil Level Checking Procedure:

The S54 and S62 engines require a different procedure than conventional practice to check the oil level, which must be followed precisely for a true

indication of the oil fill level:

^ The engine must first be at full operating temperature.

^ Let the engine idle for at least 15 seconds.

^ Turn the engine off

^ Wait at least 1 minute for the oil to drain down into the sump.

^ Check the level using the dipstick.

[NEW] All NG6, N62TU, N63, S63, N74, S65 and S85 Engines

These engines are equipped with an electronic oil level check. Follow the procedure in the Owner's Manual for proper checking of the oil level.

WARRANTY INFORMATION

For information only

ATTACHMENTS

2010-2020 BMW 535i Sedan (E60) L6-3.0L Turbo (N54) Page 81

2010-2020 BMW 528i Technical Service Bulletin # 111190 Date: 120301

2010-2020 BMW 528i Technical Service Bulletin # 111190 Date: 120301

Engine - E Series Engine Oil Capacities

SI B11 11 90

Engine

March 2012

Technical Service

This Service Information bulletin supersedes SI B11 11 90 dated November 2011.

[NEW] designates changes to this revision

SUBJECT

Engine Oil Capacities

MODEL

All E Series except E12, E21 and E23

SITUATION

The attached [NEW] chart has been revised to show all engine oil capacities (with oil filter change) for current BMW engines, as well as earlier

production BMW engines. This information is also included in the technical data section of TIS and the Owner's Manual.

2010-2020 BMW 528i (E60) L6-3.0L (N52K) Page 77

When checking the oil level after an oil change, the level should be in the upper third of the space between the MIN and MAX marks on the dipstick.

If the dipstick displays an improper reading after adding the specified amount of oil, first verify that the engine has the correct dipstick installed.

Refer to ETK for individual parts information.

BMW recommends checking the oil level and, if necessary, topping up, using the correct viscosity and quality specification whenever refilling is

required (refer to SI B11 08 98 for details).

M3, M Coupe, M Roadster (S54), M5 and Z8 (S62) Engine Oil Level Checking Procedure:

The S54 and S62 engines require a different procedure than conventional practice to check the oil level, which must be followed precisely for a true

indication of the oil fill level:

^ The engine must first be at full operating temperature.

^ Let the engine idle for at least 15 seconds.

^ Turn the engine off

^ Wait at least 1 minute for the oil to drain down into the sump.

^ Check the level using the dipstick.

[NEW] All NG6, N62TU, N63, S63, N74, S65 and S85 Engines

These engines are equipped with an electronic oil level check. Follow the procedure in the Owner's Manual for proper checking of the oil level.

WARRANTY INFORMATION

For information only

ATTACHMENTS

2010-2020 BMW 528i (E60) L6-3.0L (N52K) Page 78

2010-2020 BMW 335i Technical Service Bulletin # 111190 Date: 120301

2010-2020 BMW 335i Technical Service Bulletin # 111190 Date: 120301

Engine - E Series Engine Oil Capacities

SI B11 11 90

Engine

March 2012

Technical Service

This Service Information bulletin supersedes SI B11 11 90 dated November 2011.

[NEW] designates changes to this revision

SUBJECT

Engine Oil Capacities

MODEL

All E Series except E12, E21 and E23

SITUATION

The attached [NEW] chart has been revised to show all engine oil capacities (with oil filter change) for current BMW engines, as well as earlier

production BMW engines. This information is also included in the technical data section of TIS and the Owner's Manual.

2010-2020 BMW 335i Sedan (E90) L6-3.0L Turbo (N54) Page 77

When checking the oil level after an oil change, the level should be in the upper third of the space between the MIN and MAX marks on the dipstick.

If the dipstick displays an improper reading after adding the specified amount of oil, first verify that the engine has the correct dipstick installed.

Refer to ETK for individual parts information.

BMW recommends checking the oil level and, if necessary, topping up, using the correct viscosity and quality specification whenever refilling is

required (refer to SI B11 08 98 for details).

M3, M Coupe, M Roadster (S54), M5 and Z8 (S62) Engine Oil Level Checking Procedure:

The S54 and S62 engines require a different procedure than conventional practice to check the oil level, which must be followed precisely for a true

indication of the oil fill level:

^ The engine must first be at full operating temperature.

^ Let the engine idle for at least 15 seconds.

^ Turn the engine off

^ Wait at least 1 minute for the oil to drain down into the sump.

^ Check the level using the dipstick.

[NEW] All NG6, N62TU, N63, S63, N74, S65 and S85 Engines

These engines are equipped with an electronic oil level check. Follow the procedure in the Owner's Manual for proper checking of the oil level.

WARRANTY INFORMATION

For information only

ATTACHMENTS

2010-2020 BMW 335i Sedan (E90) L6-3.0L Turbo (N54) Page 78

2010-2020 BMW 328XI Technical Service Bulletin # 111190 Date: 120301

2010-2020 BMW 328XI Technical Service Bulletin # 111190 Date: 120301

Engine - E Series Engine Oil Capacities

SI B11 11 90

Engine

March 2012

Technical Service

This Service Information bulletin supersedes SI B11 11 90 dated November 2011.

[NEW] designates changes to this revision

SUBJECT

Engine Oil Capacities

MODEL

All E Series except E12, E21 and E23

SITUATION

The attached [NEW] chart has been revised to show all engine oil capacities (with oil filter change) for current BMW engines, as well as earlier

production BMW engines. This information is also included in the technical data section of TIS and the Owner's Manual.

2010-2020 BMW 328xi Sedan AWD (E90) L6-3.0L (N52K) Page 76

When checking the oil level after an oil change, the level should be in the upper third of the space between the MIN and MAX marks on the dipstick.

If the dipstick displays an improper reading after adding the specified amount of oil, first verify that the engine has the correct dipstick installed.

Refer to ETK for individual parts information.

BMW recommends checking the oil level and, if necessary, topping up, using the correct viscosity and quality specification whenever refilling is

required (refer to SI B11 08 98 for details).

M3, M Coupe, M Roadster (S54), M5 and Z8 (S62) Engine Oil Level Checking Procedure:

The S54 and S62 engines require a different procedure than conventional practice to check the oil level, which must be followed precisely for a true

indication of the oil fill level:

^ The engine must first be at full operating temperature.

^ Let the engine idle for at least 15 seconds.

^ Turn the engine off

^ Wait at least 1 minute for the oil to drain down into the sump.

^ Check the level using the dipstick.

[NEW] All NG6, N62TU, N63, S63, N74, S65 and S85 Engines

These engines are equipped with an electronic oil level check. Follow the procedure in the Owner's Manual for proper checking of the oil level.

WARRANTY INFORMATION

For information only

ATTACHMENTS

2010-2020 BMW 328xi Sedan AWD (E90) L6-3.0L (N52K) Page 77

2010-2020 BMW 328i Technical Service Bulletin # 111190 Date: 120301

2010-2020 BMW 328i Technical Service Bulletin # 111190 Date: 120301

Engine - E Series Engine Oil Capacities

SI B11 11 90

Engine

March 2012

Technical Service

This Service Information bulletin supersedes SI B11 11 90 dated November 2011.

[NEW] designates changes to this revision

SUBJECT

Engine Oil Capacities

MODEL

All E Series except E12, E21 and E23

SITUATION

The attached [NEW] chart has been revised to show all engine oil capacities (with oil filter change) for current BMW engines, as well as earlier

production BMW engines. This information is also included in the technical data section of TIS and the Owner's Manual.

2010-2020 BMW 328i Sedan (E90) L6-3.0L (N52K) Page 76

When checking the oil level after an oil change, the level should be in the upper third of the space between the MIN and MAX marks on the dipstick.

If the dipstick displays an improper reading after adding the specified amount of oil, first verify that the engine has the correct dipstick installed.

Refer to ETK for individual parts information.

BMW recommends checking the oil level and, if necessary, topping up, using the correct viscosity and quality specification whenever refilling is

required (refer to SI B11 08 98 for details).

M3, M Coupe, M Roadster (S54), M5 and Z8 (S62) Engine Oil Level Checking Procedure:

The S54 and S62 engines require a different procedure than conventional practice to check the oil level, which must be followed precisely for a true

indication of the oil fill level:

^ The engine must first be at full operating temperature.

^ Let the engine idle for at least 15 seconds.

^ Turn the engine off

^ Wait at least 1 minute for the oil to drain down into the sump.

^ Check the level using the dipstick.

[NEW] All NG6, N62TU, N63, S63, N74, S65 and S85 Engines

These engines are equipped with an electronic oil level check. Follow the procedure in the Owner's Manual for proper checking of the oil level.

WARRANTY INFORMATION

For information only

ATTACHMENTS

2010-2020 BMW 328i Sedan (E90) L6-3.0L (N52K) Page 77

2010-2020 BMW 328Cic Technical Service Bulletin # 111190 Date: 120301

2010-2020 BMW 328Cic Technical Service Bulletin # 111190 Date: 120301

Engine - E Series Engine Oil Capacities

SI B11 11 90

Engine

March 2012

Technical Service

This Service Information bulletin supersedes SI B11 11 90 dated November 2011.

[NEW] designates changes to this revision

SUBJECT

Engine Oil Capacities

MODEL

All E Series except E12, E21 and E23

SITUATION

The attached [NEW] chart has been revised to show all engine oil capacities (with oil filter change) for current BMW engines, as well as earlier

production BMW engines. This information is also included in the technical data section of TIS and the Owner's Manual.

2010-2020 BMW 328Cic Convertible (E93) L6-3.0L (N51) Page 73

When checking the oil level after an oil change, the level should be in the upper third of the space between the MIN and MAX marks on the dipstick.

If the dipstick displays an improper reading after adding the specified amount of oil, first verify that the engine has the correct dipstick installed.

Refer to ETK for individual parts information.

BMW recommends checking the oil level and, if necessary, topping up, using the correct viscosity and quality specification whenever refilling is

required (refer to SI B11 08 98 for details).

M3, M Coupe, M Roadster (S54), M5 and Z8 (S62) Engine Oil Level Checking Procedure:

The S54 and S62 engines require a different procedure than conventional practice to check the oil level, which must be followed precisely for a true

indication of the oil fill level:

^ The engine must first be at full operating temperature.

^ Let the engine idle for at least 15 seconds.

^ Turn the engine off

^ Wait at least 1 minute for the oil to drain down into the sump.

^ Check the level using the dipstick.

[NEW] All NG6, N62TU, N63, S63, N74, S65 and S85 Engines

These engines are equipped with an electronic oil level check. Follow the procedure in the Owner's Manual for proper checking of the oil level.

WARRANTY INFORMATION

For information only

ATTACHMENTS

2010-2020 BMW 328Cic Convertible (E93) L6-3.0L (N51) Page 74

2010-2020 BMW 323i Technical Service Bulletin # 111190 Date: 120301

2010-2020 BMW 323i Technical Service Bulletin # 111190 Date: 120301

Engine - E Series Engine Oil Capacities

SI B11 11 90

Engine

March 2012

Technical Service

This Service Information bulletin supersedes SI B11 11 90 dated November 2011.

[NEW] designates changes to this revision

SUBJECT

Engine Oil Capacities

MODEL

All E Series except E12, E21 and E23

SITUATION

The attached [NEW] chart has been revised to show all engine oil capacities (with oil filter change) for current BMW engines, as well as earlier

production BMW engines. This information is also included in the technical data section of TIS and the Owner's Manual.

2010-2020 BMW 323i Sedan (E90) (CANADA) L6-2.5L (N52) Page 42

When checking the oil level after an oil change, the level should be in the upper third of the space between the MIN and MAX marks on the dipstick.

If the dipstick displays an improper reading after adding the specified amount of oil, first verify that the engine has the correct dipstick installed.

Refer to ETK for individual parts information.

BMW recommends checking the oil level and, if necessary, topping up, using the correct viscosity and quality specification whenever refilling is

required (refer to SI B11 08 98 for details).

M3, M Coupe, M Roadster (S54), M5 and Z8 (S62) Engine Oil Level Checking Procedure:

The S54 and S62 engines require a different procedure than conventional practice to check the oil level, which must be followed precisely for a true

indication of the oil fill level:

^ The engine must first be at full operating temperature.

^ Let the engine idle for at least 15 seconds.

^ Turn the engine off

^ Wait at least 1 minute for the oil to drain down into the sump.

^ Check the level using the dipstick.

[NEW] All NG6, N62TU, N63, S63, N74, S65 and S85 Engines

These engines are equipped with an electronic oil level check. Follow the procedure in the Owner's Manual for proper checking of the oil level.

WARRANTY INFORMATION

For information only

ATTACHMENTS

2010-2020 BMW 323i Sedan (E90) (CANADA) L6-2.5L (N52) Page 43

2010-2020 BMW 135i Technical Service Bulletin # 111190 Date: 120301

2010-2020 BMW 135i Technical Service Bulletin # 111190 Date: 120301

Engine - E Series Engine Oil Capacities

SI B11 11 90

Engine

March 2012

Technical Service

This Service Information bulletin supersedes SI B11 11 90 dated November 2011.

[NEW] designates changes to this revision

SUBJECT

Engine Oil Capacities

MODEL

All E Series except E12, E21 and E23

SITUATION

The attached [NEW] chart has been revised to show all engine oil capacities (with oil filter change) for current BMW engines, as well as earlier

production BMW engines. This information is also included in the technical data section of TIS and the Owner's Manual.

2010-2020 BMW 135i Convertible (E88) L6-3.0L Turbo (N54) Page 89

When checking the oil level after an oil change, the level should be in the upper third of the space between the MIN and MAX marks on the dipstick.

If the dipstick displays an improper reading after adding the specified amount of oil, first verify that the engine has the correct dipstick installed.

Refer to ETK for individual parts information.

BMW recommends checking the oil level and, if necessary, topping up, using the correct viscosity and quality specification whenever refilling is

required (refer to SI B11 08 98 for details).

M3, M Coupe, M Roadster (S54), M5 and Z8 (S62) Engine Oil Level Checking Procedure:

The S54 and S62 engines require a different procedure than conventional practice to check the oil level, which must be followed precisely for a true

indication of the oil fill level:

^ The engine must first be at full operating temperature.

^ Let the engine idle for at least 15 seconds.

^ Turn the engine off

^ Wait at least 1 minute for the oil to drain down into the sump.

^ Check the level using the dipstick.

[NEW] All NG6, N62TU, N63, S63, N74, S65 and S85 Engines

These engines are equipped with an electronic oil level check. Follow the procedure in the Owner's Manual for proper checking of the oil level.

WARRANTY INFORMATION

For information only

ATTACHMENTS

2010-2020 BMW 135i Convertible (E88) L6-3.0L Turbo (N54) Page 90

2010-2020 BMW 128i Technical Service Bulletin # 111190 Date: 120301

2010-2020 BMW 128i Technical Service Bulletin # 111190 Date: 120301

Engine - E Series Engine Oil Capacities

SI B11 11 90

Engine

March 2012

Technical Service

This Service Information bulletin supersedes SI B11 11 90 dated November 2011.

[NEW] designates changes to this revision

SUBJECT

Engine Oil Capacities

MODEL

All E Series except E12, E21 and E23

SITUATION

The attached [NEW] chart has been revised to show all engine oil capacities (with oil filter change) for current BMW engines, as well as earlier

production BMW engines. This information is also included in the technical data section of TIS and the Owner's Manual.

2010-2020 BMW 128i Convertible (E88) L6-3.0L (N51) Page 87

When checking the oil level after an oil change, the level should be in the upper third of the space between the MIN and MAX marks on the dipstick.

If the dipstick displays an improper reading after adding the specified amount of oil, first verify that the engine has the correct dipstick installed.

Refer to ETK for individual parts information.

BMW recommends checking the oil level and, if necessary, topping up, using the correct viscosity and quality specification whenever refilling is

required (refer to SI B11 08 98 for details).

M3, M Coupe, M Roadster (S54), M5 and Z8 (S62) Engine Oil Level Checking Procedure:

The S54 and S62 engines require a different procedure than conventional practice to check the oil level, which must be followed precisely for a true

indication of the oil fill level:

^ The engine must first be at full operating temperature.

^ Let the engine idle for at least 15 seconds.

^ Turn the engine off

^ Wait at least 1 minute for the oil to drain down into the sump.

^ Check the level using the dipstick.

[NEW] All NG6, N62TU, N63, S63, N74, S65 and S85 Engines

These engines are equipped with an electronic oil level check. Follow the procedure in the Owner's Manual for proper checking of the oil level.

WARRANTY INFORMATION

For information only

ATTACHMENTS

2010-2020 BMW 128i Convertible (E88) L6-3.0L (N51) Page 88

© E-commerce Blogger powered by 168 MOTIVE Shopping Mall . | Back To Top